Upper and lower limb coordination trainer is quite suitable for people who are undergoing rehabilitation or for those who could not deliver high-intensity exercises. Upper and lower limb coordination trainer targets at improving the co-ordination and joints flexibility of upper limbs and lower limbs.
It could be installed on the roadside, residential quarters, parks and other public fitness areas.
The main materials of Upper and lower limb coordination trainer are steel and wooden plastic composite. These materials undergo two kinds of surface treatments, including zinc-rich primer coating and electrostatic coating. After the process, the apparatus possesses good performance in corrosion resistance and water resistance. Even installed in an outdoor area, paint shedding, which may lead to a poor appearance, will barely generate.
Dimension: 856×1124×1305 mm
Max. load bearing: 120kg
Serving life: 8 years
Accommodation capability: 1
Installment: direct embedment
Steel tube dimension: 80mm*120mm*3mm
Main standing column: 120*120mm
Wooden plastic composite board thickness: 20mm
Have a seat and grab the handle bars. Step on the foot pedals, and ensure that you feel balanced before you begin your workout. Move one leg forward at the same time that you move the other one backward.
Range limiter is installed in the apparatus, which avoids the squeezing of people's foot. Besides that, it also prevents thigh strain caused by overlarge amplitude angle. Rotating shaft possesses a high precision, and it is perfectly matched with the trainer. Besides that, water-proof cover is also installed in the apparatus, which provides full protection against water and dust.
Protection pads are also installed on both sides of pedals. These pads are designed to avoid danger caused by swinging. Besides that, the installment of protection pads provides pedal a firm structure and long serving life.
The diameter of the enclosed openings should be less than 89mm.
The distance of the parts should be less than 8mm or greater than 30mm.
There is no hooks or structures which are easily intertwined with each other.
There is no designs of protrusions at the corners of the equipment in order to protect the head of the children from being injured in bumping.
② Backfill soil;
③ Concrete pouring layer;
④ Concrete cushion
|Key step||Installation notes|
|Digging holes||Dimension of the holes: 410*410*500mm;|
|Concrete bedding at the bottom of the hole||Concrete thickness: 100mm; concrete formula (cement, sand, stone) 1:2:3.5;|
|Equipment burying||Put the equipment right into the holes; adjust the equipment, ensuring that the upright is perpendicular to the ground and the connection site of the equipment and the built-in fitting should be at the same level with the floor.|
|Concrete pouring||Pour the concrete around the upright of the equipment. The filling height is 300mm. The concrete formula (cement, sand, stone) is 1:2:3.5.|
|Soil backfill||The soil backfill on top of the concrete pouring layer is 100mm. Thus it can play a role as the buffering when accidental fall happens.|
|Equipment application||7 days after the installation finished, the equipment can be put into use.|
Okstar Sports offers hundreds of outdoor fitness and exercise equipment for the different age levels, our company provides custom outdoor fitness and playground equipment solutions for children, young people, middle-aged and old aged people. Over 10 years' experience, we are offering quality outdoor fitness and gym equipment for use in parks, residential area, rehabilitation center, beachside and so on.
outdoor gym, outdoor fitness, leg exercise, arm exercise