Parallel bars target shoulders and arms. They are always used to increase the arm powers. If you, as an amateurish fitness enthusiast, want an exercise with parallel bars, you should at first stand between a set of parallel bars. And then place a hand on each bar, and then take a small jump to help you get into the starting position with your arms locked out. Swing forward and backward or just bending your knees. And then back to the starting position. These motions target an exercise for muscle endurance in shoulders and arms. But if you are a professional gymnast, and you could ensure that your palm will not get hurt and no danger will be caused due to the "poor strength" of the apparatus when you are doing the skillful moves, you shall feel free about that.
Main standing column diameter: 114mm
Steel tube thickness: 3mm
Surface treatment: zinc-rich primer coating and high-temperature electrostatic coating
Max. load bearing: 120kg
Serving life: 8 years
Accommodation capability: 1
Stand between a set of parallel bars, and place a hand on each bar, and then take a small jump to help you get into the starting position with your arms locked out. Swing forward and backward or just bending your knees. And then back to the starting position.
Parallel bars are manufactured with seamless steel tube, with a diameter of φ42mm, and a thickness of 3.5mm. It features firm structure and long serving life.
Plastic anti-theft nut is used in the parallel bars. The design could not only guard against theft, but also provide full protection against rusting, looseness and water.
Advanced electrostatic coating line us adopted. Meanwhile, a non-toxic and high-quality molding powder used when manufacturing the apparatus. These designs ensure parallel bar a long serving life.
The beam is made of 3.5mm seamless tube which can effectively protect the users from being scratched during the use of the equipment.
There is no hooks or structures which are easily intertwined with each other.
There is no designs of protrusions at the corners of the equipment in order to protect the head of the children from being injured in bumping.
② Backfill soil;
③ Concrete pouring layer;
④ Concrete cushion
|Key step||Installation notes|
|Digging holes||Dimension of the holes: 410*410*600mm;|
|Concrete bedding at the bottom of the hole||Concrete thickness: 100mm; concrete formula (cement, sand, stone) 1:2:3.5;|
|Equipment burying||Put the equipment right into the holes; adjust the equipment, ensuring that the upright is perpendicular to the ground and the connection site of the equipment and the built-in fitting should be at the same level with the floor.|
|Concrete pouring||Pour the concrete around the upright of the equipment. The filling height is 300mm. The concrete formula (cement, sand, stone) is 1:2:3.5.|
|Soil backfill||The soil backfill on top of the concrete pouring layer is 100mm. Thus it can play a role as the buffering when accidental fall happens.|
|Equipment application||7 days after the installation finished, the equipment can be put into use.|
Okstar Sports offers hundreds of outdoor fitness and exercise equipment for the different age levels, our company provides custom outdoor fitness and playground equipment solutions for children, young people, middle-aged and old aged people. Over 10 years' experience, we are offering quality outdoor fitness and gym equipment for use in parks, residential area, rehabilitation center, beachside and so on.
outdoor gym, outdoor fitness, muscle exercise